Item Tag ERP 500

Permeate Pump. Aquatec ERP-500 For Reverse Osmosis (Mounting Options)

Permeate Pump. Aquatec ERP-500 permeate pump Aquatec ERP-500 permeate pump is designed for RO systems 24-75 GPD. The pump uses no electricity, only hydraulic pressure from RO brine to pump permeate to the storage tank. Installation of a permeate pump will improve RO water recovery and reduce RO storage tank fill time, improve membrane performance and increase membrane lifetime, and reduce brine water to drain by up to 80%. An RO system with a permeate pump requires no automatic shut off (ASO) valve, which shuts off water flow when system pressure reaches 60-65% of line pressure. A permeate pump will continue to operate until system pressure is equal to line pressure, increasing system pressure 35-40% (compared to ASO valve) and water delivery to the faucet. The ERP-500 is equipped with a noise silencing insert, so the pump is extremely quiet while operating and will operate with supply pressure as low as 30 psi. Package Options: 1. Pump Only 2. Pump + Mounting Clip/Screws 3. Pump + Mounting Kit (see below for details) • Mounting Clip and screws • Four (4) 1/4" push to connect and 1/4" stem connectors • 4' LLDPE food grade tubing

ERP-500. Aquatec ERP-500 Permeate Pump for Reverse Osmosis (Mounting Kit)

The Aquatec ERP-500 permeate pump is for RO systems 50 GPD or less. The pump uses no electricity, only hydraulic pressure from RO brine to pump permeate to the storage tank. Installation of a permeate pump will improve membrane performance and reduces brine water to drain by up to 80%. An RO system with a permeate pump requires no automatic shut off valve, which shuts off water flow when system pressure reaches 60-65% of line pressure. A permeate pump will continue to operate until system pressure is equal to line pressure, significantly increasing system pressure and water delivery to the faucet. Included in this pump package•ERP-500 Permeate Pump•Pump mounting and screws•Four (4) 1/4" push to connect x 1/4" stem elbows• 4' LLDPE food grade tubing (Mur-Lok or John Guest)

Permeate Pump. Aquatec ERP-500 For Reverse Osmosis (Mounting Options + tubing)

Permeate Pump. Aquatec ERP-500 For Reverse Osmosis (Mounting Options + tubing). The Aquatec ERP-500 Permeate Pump will bring storage tanks up to line pressure, then shut the system down when the tank reaches capacity, removing the need for a hydraulic shut-off valve. Permeate pumps also deliver faster RO water production, higher delivery pressures, superior water quality, and extended filter/membrane capacity.Features:No electricity required. The Aquatec ERP-500 is powered by hydraulic energy from the brine water that is usually lost to the drain.No loud clicking or gurgling sounds. This pump is specifically designed for residential applications where noise is a key concern. The ERP-500 includes a specially designed insert . The Permeate Pump pushes more purified water into the storage tank, reducing membrane back pressure, therefore maximizing available product tank pressure (up to 95% of feed pressure).Improved efficiency. This pump dramatically improves the membrane's production, reducing waste-water by 80% or more. Basically, if an R.O. system requires 10 gallons of tap water to produce 1 gallon of pure water (10:1), the Permeate Pump should reduce this ratio below 3:1. It also decreases product tank “fill time" by up to 65%.Additional Features:Improves membrane life, prevents “TDS creep"For all membranes rated 10 - 50 GPDEffective for inlet water pressures as low as 30 PSICompact size for easy installation