Item Tag 132

4-gallon PAE pressure tank blue color for drinking water or aquarium use, fits all RO systems, RO+DI systems includes pressure gauge ball valve and tubing Part no.: 532BPG Applications: for Aquarium: Add a tank for easy top-off. For example, if your fish tank and the RO+DI unit is far apart where direct connection is not available, you can add a tank to your RO+DI unit. It takes about 1 to 2 hours to fill up, then you can take the tank and connect it to the sump of your fish tank. Also connect a float valve (FV-14 or FV-15) to the setup. As the water evaporates, the water level drops, then the float valve opens up, the water from the pressure tank supplies the water, and then the float valve closes. After 3 gallons of water in the tank is depleted, you need to refill it again. Or if you have two tanks, you would have 5-6 gallons of water. Note: Even if you have a direct connection between the RO+DI unit and your fish tank, adding a tank to the setup would reduce the unnecessary turning on/off of your RO+DI unit. for Drinking: If your tank is losing capacity and not able to be recharged, or if it is too dirty, then it's time to replace it with a new tank. Add additional tank to double the amount of water you can dispense at one time. Connect to an icemaker or a refrigerator. Description: A pressure tank is used in RO systems to accumulate water and provide pressure when dispensing the purified water. It has a water bladder inside the tank that holds the purified water. Outside the bladder it contains compressed air. When you dispense water, the compressed air squeezes the bladder and forces the water out with pressure. You can also connect several tanks together to provide more water. Specification: Blue color, outside volume 4 gallons, inside bladder holds 3.2 gallons @ 60 psi input pressure Dimension: 10.5" diameter, 15" height, 1/4" inlet connection Material: Outside is steel, inside is a FDA approved food grade bladder. Stainless steel connection on top. Purified water only come in contact with bladder and the stainless steel connector on top. What's included: Blue pressure tank Tank stand, (can be positioned standing upright or laying down) Plastic tank ball valve, connects to 1/4" tubing 5 feet of 1/4" tubingInline pressure gauge Quick connect 1/4" tee fitting for easy installation (tee fitting is required to install the tank) Pre-charged with 5 to 7 psi air pressure